Standard Bypass Shears

How to Clean and Maintain Verdemax Standard Bypass Shears

1. Regular Cleaning After Use

• Wipe Down the Blades: After each use, clean the blades of your Verdemax Bypass Shears by wiping them with a soft cloth to remove sap, plant residue, and dirt. If the shears have been used on wet or resinous plants, use a damp cloth to clean the blades. This prevents any build-up that could cause rusting or clogging.

• Deep Cleaning for Stubborn Residue: Occasionally, your shears may accumulate stubborn plant sap or sticky residue, especially if used on plants like pine or other resinous species. For deeper cleaning, soak the blades in warm, soapy water for a few minutes, then scrub with a soft brush or toothbrush. Avoid using abrasive materials that could damage the blade surface.

• Rinse and Dry Thoroughly: After cleaning, rinse your shears under running water (if necessary) and immediately dry them with a cloth to avoid water spots and rusting. Keeping the shears dry after cleaning is essential to prevent corrosion.

2. Lubricating the Blades

• Lubricate Moving Parts: To ensure smooth operation, regularly apply a light oil (such as motor oil or vegetable oil) to the blades and pivot points. Use an oil that won't become gummy over time, which could cause the blades to stick or lose their sharpness. A few drops of oil are sufficient to keep the moving parts functioning properly.

• Blade Hinge Maintenance: Pay special attention to the hinge mechanism where the blades meet. If this area becomes stiff, apply a lubricant directly to the hinge and work the mechanism back and forth to ensure even distribution of the oil.

3. Sharpening the Blades

• Check for Dullness: If you notice that your shears are no longer cutting cleanly or seem to be tearing rather than slicing through stems, the blades may need sharpening. Dull blades can cause unnecessary damage to plants, so keeping them sharp is essential for both plant health and tool longevity.

• Sharpening Tools: Use a sharpening stone, diamond file, or a specialized tool sharpening kit to hone the blades. Follow the blade's original bevel angle (usually around 20 degrees) to maintain an effective cutting edge. Be careful not to over-sharpen, as this can affect the cutting performance and durability of the blade.

• Test the Blades: After sharpening, test the shears on a small branch or twig to see if they cut cleanly. If necessary, make further adjustments to the sharpness until you achieve a smooth, clean cut.

Safe Handling and Storage of Verdemax Standard Bypass Shears

1. Use Gloves for Safety

• Wear Protective Gloves: When using the Verdemax Standard Bypass Shears, it's always a good idea to wear gloves to protect your hands from sharp blades, thorns, and any plant sap that may cause irritation. Leather or thick gardening gloves provide adequate protection while ensuring a secure grip on the handles.

• Be Aware of the Blades: Always be mindful of the sharp edges of the shears. When transporting or storing the shears, make sure the blades are closed to reduce the risk of accidental cuts.

2. Proper Storage

• Store in a Dry, Cool Location: After use, store your Verdemax Bypass Shears in a cool, dry place, away from extreme temperatures. Avoid leaving them outside, as exposure to moisture or harsh weather conditions can cause rust or wear on the blades and handles.

• Use a Tool Holder or Sheath: To keep your shears protected, store them in a tool box, gardening shed, or use a protective sheath to cover the blades when not in use. This helps avoid accidental damage to the blades or any unintended injury when handling them.

• Hang for Easy Access: Hanging your shears on a peg or hook in your shed or garage is an excellent way to keep them easily accessible while also ensuring they are stored safely. Hanging also keeps them away from contact with moisture and dirt.

3. Avoid Overuse and Excessive Force

• Do Not Overstretch the Blades: The Verdemax Standard Bypass Shears are designed for pruning and trimming plants. Avoid using them on materials that are too thick or hard for the tool, such as woody branches or large stems. For heavier tasks, use a pair of loppers or a pruning saw to prevent unnecessary strain on the blades.

• Cut Within the Tool's Capacity: Make sure to cut branches or stems that fall within the shears' cutting capacity. Using them on too thick or tough material can lead to damage, blunt edges, or misalignment of the blades, making them ineffective for future cuts.

Benefits of Verdemax Standard Bypass Shears

1. Precision and Clean Cuts

• Ideal for Pruning: Bypass shears are designed with two blades that work like scissors, offering precision for clean cuts. This makes them perfect for trimming plants and branches without damaging the plant or leaving ragged edges.

• Healthy Plants: Clean cuts allow the plant to heal more effectively, preventing the risk of infection. This is particularly important for flowering plants, shrubs, and young trees that need a healthy, non-damaged stem to continue growing.

2. Ergonomically Designed for Comfort

• Comfortable Handles: The handles of Verdemax Standard Bypass Shears are ergonomically designed for maximum comfort, allowing you to prune for extended periods without causing hand or wrist fatigue. Whether you’re doing light trimming or heavier pruning, the design ensures a steady grip and minimizes strain on your hands.

• Lightweight and Easy to Use: These shears are lightweight, making them easy to handle and maneuver even in tight spaces. Whether you are working in your garden or trimming small plants on a patio, these shears are easy to carry around.

3. Durability and Long-Lasting Performance

• Strong Steel Blades: The blades are made from high-quality steel, providing durability and the ability to withstand regular use. With proper maintenance, your Verdemax Standard Bypass Shears will last for many seasons of gardening and pruning.

• Rust-Resistant Finish: Many Verdemax shears come with a rust-resistant coating that helps prevent the development of rust, ensuring that the blades stay sharp and effective for longer.

Conclusion

By following proper cleaning, lubrication, and sharpening routines, you can extend the lifespan of your Verdemax Standard Bypass Shears and keep them functioning at their best. With a few simple steps for maintenance, safe handling, and storage, these shears will continue to provide precise cuts, supporting the health and beauty of your plants. Whether you are a professional gardener or a hobbyist, Verdemax Standard Bypass Shears are an essential tool for anyone looking to maintain a well-pruned garden.

• Brand
  Verdemax

We currently only deliver within the island of Ireland, other countries can be quoted for by contacting [email protected] or via telephone on 06964084
 

Standard Delivery is FREE on orders over €250*

All standard deliveries will be completed within 5-7 working days via Fastway Couriers, any delay to this delivery time, the customer will be notified by One of our staff.

The in-Store delivery charge will vary compared with online, in-store delivery charge is done on a case by case basis. 

* Only mainland Ireland addresses qualify for free delivery.
 

Live Plants Delivery

Our live plants are packed with care and diligence by our staff, our horticulturists review each plant before despatch to ensure quality is maintained.
Live Plant delivery charges are not calculated on weight but on the space required per package to ensure safe delivery, so delivery charges may vary as some plants require more space than others when packed.
All live plants are despatched within 3-5 working days where possible, our couriers aim to deliver within 48 hours of despatch from our Garden Centre to allow the plant to arrive in healthy condition.
 

Click & Collect

Can’t wait for delivery? Why not try our FREE Click & Collect service? Simply make your purchase online and collect it from our store located in Croagh Co. Limerick. Our staff will contact you by phone when your order is ready for collection (Please allow 24 hours minimum). When collecting your item, call the store on 069-64084. We will then load into your car as required. This service is available in-store 9am – 6pm Monday – Saturday (No collections on Sundays)

Click here for more information about our shipping conditions.

You can pay your online order either by credit card or via Paypal.
If you have any further questions about the online order payment please contact us via ­069 640 84 or mail.